***  SETUP LOGFILE ***

Filename:        S7GR7LOG.TXT
Setup Source Version:   K03.01.00.06_11.01.00.04
SetupMasterFrame Name:   Product_Masterframe
Install Start:   3-6-2007, 15:27:34

    ProductName: 'SIMATIC S7-GRAPH'
    Release: 'K5.3.4.0_5.2.0.1'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2177'
    Property 'Installed'; ''
    Property 'REINSTALLMODE'; ''
    SharedPath: 'C:\Siemens\Common\'
    Property 'DATABASE'; 'C:\DOCUME~1\ww\CONFIG~1\Temp\dff8e.msi'
    Property 'OriginalDatabase'; '\\perseo\F\SIMATIC Software\S7-Graph\DISK1\Setup.msi'
    REBOOTFILE= 
    COMMANDLINE= -OF:C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
       Setup startet with parameterfile (OF-file).
         (PR)<= SetupMode = Batch
         (PR)<= InstType = PROFESSIONAL
         (PR)<= JumpOverParam = 1
         (OF)<= SetupSucceeded = 0
         (OF)<= AuthorizationDone = 1
         (OF)<= RebootRequested = 0
    
       read Properties from (OF-file): C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
         (PR)<= SetupLanguage = D
         (PR)<= LanguagesToInstall = D
         (PR)<= StartLanguage = D
         (PR)<= NameOfUser = VIOLET
         (PR)<= NameOfCompany = VIOLET REINFORCEMENT S. de R.L
         (PR)<= ID empty
         (PR)<= DestinationDrive = C
         (PR)<= DestinationPath = \SIEMENS\STEP7
         (PR)<= CommonDrive = C
         (PR)<= LicenseSource = A
         (PR)<= LicenseDestination = C
         (PR)<= LicenseRequested = 0
         (PR)<= LicenseManagerHandling = 0
         (PR)<= NoOScheck = 0
         (PR)<= RSInstallVersion empty
    


Init global functions
SetMSISource: New install
Stream out ini file



 ReadInstalledVersionSettings
AUTSW Key: SOFTWARE\Siemens\AUTSW\S7GRAPH
Open AUTSW Key failed, Product not installed
Read settings from STEP7
	Main product installed
MAIN_STEP7_REGPATH, Languages: GERMAN,ENGLISH,FRENCH,SPANISH,ITALIAN
+ Select Language GERMAN
+ Select Language ENGLISH
+ Select Language FRENCH
+ Select Language SPANISH
+ Select Language ITALIAN
- Unselect Language JAPANESE
- Unselect Language CHINESE

Set Directories

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End


write needed licenses into the ListBox_Table
licenses' installation is parametered by the RahmenSetup
    
    Installation Mode
    Table ADSDialogs created
    InstallationMode: Installation, Dialog InstallWelcome added to ADSDialogs table
    InstallationMode: Installation, Dialog ShowReadme added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_InstallationRequirements added to ADSDialogs table
    InstallationMode: Installation, Dialog LicenseAgreement added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_Autorisation1 added to ADSDialogs table
    InstallationMode: Installation, Dialog ReadyToInstall added to ADSDialogs table
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: InstallWelcome. Next selected
    DialogIndex of next dialog: 1
    Dialog InstallWelcome will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: ShowReadme. Next selected
    DialogIndex of next dialog: 2
    Dialog ShowReadme will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_InstallationRequirements. Next selected
    DialogIndex of next dialog: 3
    start function Dlg_PrepareInstallationRequirementsDlg

    Test suppositions
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    OperatingSystem condition string to check: ( (VersionNT=500)AND (ServicePackLevel>=3 ) ) OR ((VersionNT>500)) OR (( (VersionNT=501) AND (ServicePackLevel>=1 ) )) OR ((VersionNT>501)) OR ((VersionNT=502)) OR ((VersionNT=600))
    Operating System OK
    Internet Explorer OK
    product is not installed
    Overinstallation OK
    Installed type OK

Check existing rename.
    PendingFileRenameOperations exists.
test for running applications:
    ApllicationNames: S7TGTOPX.EXE;S7GRAAPX.EXE
    CheckForRunningTasks S7TGTOPX.EXE;S7GRAAPX.EXE
    CheckForRunningTasks: WNT
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
    Supposition: check Conditions
    Condition True: NOT VersionNT64
    Dialog DLG_InstallationRequirements will not be displayed, reason: Batch ModeNo errors or warnings found
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: LicenseAgreement. Next selected
    DialogIndex of next dialog: 4
    Dialog LicenseAgreement will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_Autorisation1. Next selected
    DialogIndex of next dialog: 5
    Dialog DLG_Autorisation1 will not be displayed, reason: Batch ModeLIC_CALLDIALOG = 0
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: ReadyToInstall. Next selected
    DialogIndex of next dialog: 6
    Dialog ReadyToInstall will not be displayed, reason: Batch Mode

Free Space on local drives:
	Total Size on "C:\": 40007729152 bytes (38154 MB)	Free space: 3544461312  bytes (3380 MB)
	Total Size on "D:\": 40007729152 bytes (38154 MB)	Free space: 33286742016  bytes (31744 MB)

Used folders:
MainProd: 
MainProd: STEP7
	"MAIN_STEP7_PATH": C:\Siemens\SIMATIC_NCM\
	"COMMONDIR": C:\Siemens\Common\
	"WindowsFolder": C:\WINDOWS\
	"TempFolder": C:\DOCUME~1\ww\CONFIG~1\Temp\
	"ProgramFilesFolder": C:\Archivos de programa\


_ADS_initSuite
Ini File not found, extract
Windows Suite: Embedded
Windows Suite: not Embedded
    
    ************
    
    ProductName: 'SIMATIC S7-GRAPH'
    Release: 'K5.3.4.0_5.2.0.1'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2163'
    Property 'Installed'; ''
    Property 'REINSTALLMODE'; ''
    SharedPath: 'C:\Siemens\Common\'
    Default Destination: 'D:\'
    Property 'DATABASE'; 'C:\WINDOWS\Installer\22b6e.msi'
    Property 'OriginalDatabase'; '\\perseo\F\SIMATIC Software\S7-Graph\DISK1\Setup.msi'
    REBOOTFILE= 
    COMMANDLINE= -OF:C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
       Setup startet with parameterfile (OF-file).
         (OF)<= SetupSucceeded = 0
         (OF)<= AuthorizationDone = 1
         (OF)<= RebootRequested = 0
    
       read Properties from (OF-file): C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
         (PR)<= ID empty
         (PR)<= LicenseRequested = 0
         (PR)<= LicenseManagerHandling = 0
         (PR)<= NoOScheck = 0
         (PR)<= RSInstallVersion empty
    
Stream out ini file

    Function DetermineShortCutValues
    Language ID: 1034

Set Directories

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End

    Set Properties for Directories whithout slash
    Function DeleteShortCutsLangUnused
    Language ID: 1034
    
    Start TestSuppositionsExecute

    Test suppositions
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    OperatingSystem condition string to check: ( (VersionNT=500)AND (ServicePackLevel>=3 ) ) OR ((VersionNT>500)) OR (( (VersionNT=501) AND (ServicePackLevel>=1 ) )) OR ((VersionNT>501)) OR ((VersionNT=502)) OR ((VersionNT=600))
    Operating System OK
    Internet Explorer OK
    product is not installed
    Overinstallation OK
    Installed type OK

Check existing rename.
    PendingFileRenameOperations exists.
test for running applications:
    ApllicationNames: S7TGTOPX.EXE;S7GRAAPX.EXE
    CheckForRunningTasks S7TGTOPX.EXE;S7GRAAPX.EXE
    CheckForRunningTasks: WNT
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
    Supposition: check Conditions
    Condition True: NOT VersionNT64
    
    TestSuppositionsExecute, Errors : 0, Warnings: 0

Select language features
    Selected Startlanguage: SPANISH
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: 
Product SIMATIC S7-GRAPH Professional     Version: V5.3 + SP4     Release: K5.3.4.0_5.2.0.1;    03-06-2007;15:27:38

    Run StartApplBefore

StartApplBefore


[CompSetup Pre-Deinstall]: Collect and prepare Deinstallation of component setups (for update):
Performing Scan Components...
SourceDir: \\perseo\F\SIMATIC Software\S7-Graph\DISK1\
 ProductCode Client: {317BE896-F35E-414C-8F5B-BFB1F60B198D}
 SetupLanguage of client: 1034
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
 
Found Component: S7LUX
 Now read IniFile :\\perseo\F\SIMATIC Software\S7-Graph\DISK1\S7LUX\Version.ini
 Msi component detected (to install): simatic condition editor.msi
 
Found Component: S7GRC
 Now read IniFile :\\perseo\F\SIMATIC Software\S7-Graph\DISK1\S7GRC\Version.ini
 Msi component detected (to install): simatic graph-visualisierung.msi

Performing Deinstall Components...
 Preparing Deinstall Component: S7GRC
 IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
 Preparing Deinstall Component: S7LUX
 IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
[CompSetup Pre-Deinstall]: -- End of section



Prepare UnzipFile: write informations for installation to ini-file
Prepare UnzipFiles End

Init AUTSW Structure
    AUTSW Key Name:S7GRAPH
    AUTSW Corr:K5.3.4.0
    AUTSW Release:K5.3.4.0_5.2.0.1
    AUTSW TechnVersion:K5.3.4.0
    AUTSW Version:5.3
    AUTSW VersionString:V5.3 + SP4
    AUTSW ProdCopyright:1995-2007
    AUTSW MainFile:[MAIN_STEP7_PATH]S7gr7\S7graapx.exe
    use AUTSW Path from STEP7
    AUTSW Path:C:\Siemens\SIMATIC_NCM\
    AUTSW ProdGroup:S7
    AUTSW ProdName:S7-GRAPH Professional Edition 2006 SR3
    AUTSW ProdType:PROFESSIONAL
    AUTSW RegPath:SIEMENS\STEP7\2.0\APPLICATIONS\S7GRAAPX
__________________________________
Process Before DataMove
    Change Attribut

UnzipFiles
	unzip C:\Siemens\SIMATIC_NCM\S7Libs\Compressed\graphlib.ZIP to C:\Siemens\SIMATIC_NCM\S7Libs\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zdt02_02.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zit02_02.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zes02_01.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zfr02_02.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zes02_02.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zdt02_01.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zen02_02.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zfr02_01.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zit02_01.zip to C:\Siemens\SIMATIC_NCM\Examples\
	unzip C:\Siemens\SIMATIC_NCM\Examples\Compressed\zen02_01.zip to C:\Siemens\SIMATIC_NCM\Examples\
UnzipFiles End


Create AUTSW Key
Save actual AUTSW-Informations for Rollback
    AUTSW-Key Allready exists, save actual Informations for Rollback

Write AUTSW-Information to Registry
    SharedPath already exists in Registry :C:\Siemens\Common\
Change UninstallString
    Write DisplayName: SIMATIC S7-GRAPH V5.3 + SP4 Professional Edition 2006 SR3  
__________________________________
Process After DataMove
    Change Attribut
    
    Zip_DeleteSamples
    Reading from section UNZIP

Create language folder for documentation shortcuts
    ReadmeConnDir: C:\Siemens\Indicaciones relativas al producto\
    ReadmeStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
    Write ReadmeConnPath to Registry
    Write ReadmeStartEntry to Registry: Indicaciones relativas al producto
    Add Shortcut to Readme Folder: Deutsch
    Add Shortcut to Readme Folder: English
    Add Shortcut to Readme Folder: Franais
    Add Shortcut to Readme Folder: Espaol
    Add Shortcut to Readme Folder: Italiano
    ManualConnDir: C:\Siemens\Documentacin\
    ManualStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
    Write ManualConnPath to Registry
    Write ManualStartEntry to Registry: Documentacin
    Add Shortcut to Documentation Folder: Deutsch
    Add Shortcut to Documentation Folder: English
    Add Shortcut to Documentation Folder: Franais
    Add Shortcut to Documentation Folder: Espaol
    Add Shortcut to Documentation Folder: Italiano

WriteRegistryValues


 Custom: ProcessAfterdataMove


[CompSetup Install SharedComponentsBefore]: Collect and prepare Installation of component setups (with older version):
Performing Scan Components...
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
SourceDir: \\perseo\F\SIMATIC Software\S7-Graph\DISK1\
ProductCode of client: {317BE896-F35E-414C-8F5B-BFB1F60B198D}
 SetupLanguage of client: 1034
Read section: SharedComponentsBefore
Clientname: S7GRAPH_{317BE896-F35E-414C-8F5B-BFB1F60B198D}
FeatureName for Component S7LUX is empty
Found Component S7LUX
 [SharedComponentsBefore]ComponentName1=S7LUX
 Msi component detected (to install): simatic condition editor.msi

Performing Install Components...
 Install Component: SIMATIC Condition Editor
 Component Logfile (create/append): C:\WINDOWS\S7LUXLOG.TXT
 IsInstalled: 0, MsiCompInstalled: 0
Test for Reinstall: Is Msi CompSetup..
   Normal Component new-installation: S7LUX
 IsInstalled: 0, MsiCompInstalled: 0
 Component not (already and/or no longer) installed: Will install it...
 SetupSucceeded Value (1 or 2 would be OK): 1
 Client entry set empty - compsetup finished.
[CompSetup Install  SharedComponentsBefore]: -- End of section



Process after first component installation
[RegisterFiles]:
Process after first component installation End

    Run StartApplAfter

StartApplAfter


[CompSetup Install SharedComponentsAfter]: Collect and prepare Installation of component setups (with older version):
Performing Scan Components...
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
SourceDir: \\perseo\F\SIMATIC Software\S7-Graph\DISK1\
ProductCode of client: {317BE896-F35E-414C-8F5B-BFB1F60B198D}
 SetupLanguage of client: 1034
Read section: SharedComponentsAfter
Clientname: S7GRAPH_{317BE896-F35E-414C-8F5B-BFB1F60B198D}
FeatureName for Component S7GRC is empty
Found Component S7GRC
 [SharedComponentsAfter]ComponentName1=S7GRC
 Msi component detected (to install): simatic graph-visualisierung.msi

Performing Install Components...
 Install Component: SIMATIC GRAPH-Visualisierung
 Component Logfile (create/append): C:\WINDOWS\S7GRCVISU_LOG.TXT
 IsInstalled: 0, MsiCompInstalled: 0
Test for Reinstall: Is Msi CompSetup..
   Normal Component new-installation: S7GRC
 IsInstalled: 0, MsiCompInstalled: 0
 Component not (already and/or no longer) installed: Will install it...
 SetupSucceeded Value (1 or 2 would be OK): 1
 Client entry set empty - compsetup finished.
[CompSetup Install  SharedComponentsAfter]: -- End of section



Process after second component installation

Paraconfiguration

ParaSection: Para
 Setup key = SOFTWARE\SIEMENS\STEP7\2.0\APPLICATIONS\S7GRAAPX\General\Setup
Application to be started: C:\Siemens\SIMATIC_NCM\s7bin\S7alibxx.exe
ChangeWorkingDirectory to: C:\Siemens\SIMATIC_NCM\s7bin
Start on END: C:\Siemens\SIMATIC_NCM\s7bin\S7alibxx.exe;
Write Result to OPFile
Write ReplaceInUseFiles="" Reboot=
Section [Results]: SetupSucceeded written to C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
Write LicenseRequested="1"
Remove old Deinst_SP-Keys 
Process after second component installation End

Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: ----> Done Product SIMATIC S7-GRAPH Professional     Version: V5.3 + SP4;03-06-2007;15:28:05


** Error(s): 0 Warning(s): 0
Componentsetup Errors (not succeeded): 0 (of total count:2)

End of installation. 

Logfile closed: 3-6-2007, 15:28:05
***************************
_ADS_initSuite
Ini File not found, extract
Windows Suite: Embedded
Windows Suite: not Embedded
***  SETUP LOGFILE ***

Filename:        S7GR7LOG.TXT
Setup Source Version:   K03.01.00.06_11.01.00.04
SetupMasterFrame Name:   Product_Masterframe
Install Start:   1-3-2007, 13:53:12

    ProductName: 'SIMATIC S7-GRAPH'
    Release: 'K5.3.4.0_5.2.0.1'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2245'
    Property 'Installed'; '2007/08/03 09:49:26'
    Property 'REINSTALLMODE'; ''
    Upgrade: Installed Product: 'S7-GRAPH Professional Edition 2006 SR3'
    SharedPath: 'C:\Siemens\Common\'
    Default Destination: 'C:\Siemens\SIMATIC_NCM'
    Property 'DATABASE'; 'C:\WINDOWS\Installer\22b75.msi'
    Property 'OriginalDatabase'; 'C:\WINDOWS\Installer\22b75.msi'
    REBOOTFILE= 
    COMMANDLINE= 
Stream out ini file

    Function DetermineShortCutValues
    Language ID: 1034

Set Directories

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End

    Set Properties for Directories whithout slash
    Function DeleteShortCutsLangUnused
    Language ID: 1034

Select language features
    Selected Startlanguage: ENGLISH
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: 
Deinst SIMATIC S7-GRAPH     Version: V5.3 + SP4     Release: K5.3.4.0_5.2.0.1;    01-03-2007;13:53:19

    Run StartApplBefore

StartApplBefore

Process before uninstallation
UnRegisterFiles:
Process before uninstallation End

    Run PreUIStartAppl

PreUIStartAppl


[CompSetup Deinstall SharedComponentsAfter]: Uninstall component setups during product uninstallation: 
Performing Scan Components...
 SetupLanguage of client: 1034
Clientname: S7GRAPH_{317BE896-F35E-414C-8F5B-BFB1F60B198D}
 Found Component: S7GRC
RegKey: S7GRC

 Performing Deinstall Components...

 Preparing Deinstall Component: S7GRC
 Uninstall section:
 IsInstalled: 2, MsiCompInstalled: -1
 MSI component detected (MSI-Productkey found)
 Searching for --S7GRAPH_{317BE896-F35E-414C-8F5B-BFB1F60B198D}--
 Software\Siemens\Shared Tools\S7GRC\Clients clients: count=1, I am in Clients=YES
 Component deinstall conditions approved: S7GRC
 IsInstalled: 0, MsiCompInstalled: 0
 IsInstalled: 0, MsiCompInstalled: 0
[CompSetup Deinstall SharedComponentsAfter]: -- End of section



Prepare UnzipFile: write informations for installation to ini-file
Prepare UnzipFiles End

Init AUTSW Structure
    AUTSW Key Name:S7GRAPH
    AUTSW Corr:K5.3.4.0
    AUTSW Release:K5.3.4.0_5.2.0.1
    AUTSW TechnVersion:K5.3.4.0
    AUTSW Version:5.3
    AUTSW VersionString:V5.3 + SP4
    AUTSW ProdCopyright:1995-2007
    AUTSW MainFile:[MAIN_STEP7_PATH]S7gr7\S7graapx.exe
    use AUTSW Path from STEP7
    AUTSW Path:D:\
    AUTSW ProdGroup:S7
    AUTSW ProdName:S7-GRAPH
    AUTSW ProdType:NORMAL
    AUTSW RegPath:SIEMENS\STEP7\2.0\APPLICATIONS\S7GRAAPX
    __________________________________
    Process Before DataMove Uninst
    Change Attribut
    Uninstall: Process After DataMove Uninstall
    
    Zip_DeleteSamples
    Reading from section UNZIP

Delete AUTSW Key
Save actual AUTSW-Informations for Rollback
    AUTSW-Key Allready exists, save actual Informations for Rollback
    Actual Corr Version: K5.3.4.0
    Actual MainFile: C:\Siemens\SIMATIC_NCM\S7gr7\S7graapx.exe
    Actual Path: C:\Siemens\SIMATIC_NCM
    Actual ProdCopyright: 1995-2007
    Actual ProdGroup: S7
    Actual ProdName: S7-GRAPH Professional Edition 2006 SR3
    Actual ProdType: PROFESSIONAL
    Actual RegPath: SIEMENS\STEP7\2.0\APPLICATIONS\S7GRAAPX
    Actual Release: K5.3.4.0_5.2.0.1
    Actual TechnVersion: K5.3.4.0
    Actual Version: 5.3
    Actual VersionString: V5.3 + SP4
    Key deleted
    UNINSTALL: SharedPath already existed, should not be deleted
    Delete language folder for documentation shortcuts
    ReadmeConnDir: C:\Siemens\Indicaciones relativas al producto\
    ReadmeStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
    Delete Shortcut to Readme Folder: japanisch
    Delete Shortcut to Readme Folder: Chinese
    ManualConnDir: C:\Siemens\Documentacin\
    ManualStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
    Delete Shortcut to Documentation Folder: japanisch
    Delete Shortcut to Documentation Folder: Chinese

WriteRegistryValues


[CompSetup Deinstall SharedComponentsBefore]: Uninstall component setups during product uninstallation: 
Performing Scan Components...
 SetupLanguage of client: 1034
Clientname: S7GRAPH_{317BE896-F35E-414C-8F5B-BFB1F60B198D}
 Found Component: S7LUX
RegKey: S7LUX

 Performing Deinstall Components...

 Preparing Deinstall Component: S7LUX
 Uninstall section:
 IsInstalled: 2, MsiCompInstalled: -1
 MSI component detected (MSI-Productkey found)
 Searching for --S7GRAPH_{317BE896-F35E-414C-8F5B-BFB1F60B198D}--
 Software\Siemens\Shared Tools\S7LUX\Clients clients: count=1, I am in Clients=YES
 Component deinstall conditions approved: S7LUX
 IsInstalled: 0, MsiCompInstalled: 0
 IsInstalled: 0, MsiCompInstalled: 0
[CompSetup Deinstall SharedComponentsBefore]: -- End of section



Deinstallation: Result
Process after uninstallation
Erase files and dirs after deinstall
Process after uninstallation End
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: ----> Done Deinst SIMATIC S7-GRAPH     Version: V5.3 + SP4;01-03-2007;13:53:42


** Error(s): 0 Warning(s): 0
Componentsetup Errors (not succeeded): 0 (of total count:0)

End of installation. 

Logfile closed: 1-3-2007, 13:53:42
***************************
